RMSE 規格資料
RMVE 規格資料
型號 / Reference
| RMSE-9QE | 100 V |
| RMSE-1QE | 120 V |
| RMSE-2QE | 230 V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE Hot Air Station | 1 |
| DDE 2 Tools Control Unit | 1 |
| MSE-A Electric Desoldering Module for DDE & DME | 1 |
| T245-A General Purpose Handle (cartridge not included) | 1 |
| DR560-A Desoldering Iron | 1 |
| JT Heater Hose Sets | 1 |
| CL8499 Manual Tip Cleaner | 1 |
| Extractor Desk, composition: - 1 E2052 Extractor 20 x 20 mm - 1 E2184 Extractor 24 x 24 mm - 1 E2064 Extractor 20 x 26 mm - 1 P2220 Protector 10 x 10 mm - 1 P2235 Protector 12 x 17 mm - 1 P4000 Protector 12.4 x 12.5 mm - 1 P2230 Protector 15 x 15 mm - 1 P4010 Protector 17 x 17 mm - 1 T2050 Tripod ø39 mm - 1 T2250 Tripod ø85 mm | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| SCH-A Cartridge Holder | 1 |
| AD-SE Stand for T210 & T245 Handles | 1 |
| DR-SE Stand for DR560 | 1 |
| JT-SE Stand for JT heater | 1 |
| T260-A Pick & Place | 1 |
| PH218 Thermocouple Type K | 1 |
| PH217 Kapton tape | 1 |
產品規格 / Specifications
| Temperature (DDE) | 90 to 450 ºC / 190 to 840 ºF |
| Temperature (JTSE) | 150 to 450 ºC / 300-840 ºF |
| Air Flow (JTSE) | 5 to 50 SLPM |
| Operation modes (JTSE) | Heating / Profiles / Cooling |
| Vacuum (MSE) | 75% / 570 mmHg / 22.4 inHg |
| Flow rate (MSE) | 9 SLPM |
| Vacuum (JTSE) | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY USB-B (rear) | Software PC / Traceability |
| USB-A (front) | Firmware update. Soldering Graphics / Profiles management. |
| Robot | RS-232 remote control or Smart Fume Extractor connection |
| Type K thermocouple (JTSE) | Can be used both for Control and Protection purposes. |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| ESD/EOS ESD safe Tip to ground resistance | <2 ohms |
| Tip to ground voltage | <2 mV RMS |
| POWER SUPPLY Peak Power (DDE) | 150 W per tool – 23.5 V |
| Peak Power (JTSE) | 700W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT Dimensions/Net weight | See individual modules |
| Package | 370 x 480 x 380 mm / 16.50 kg 14.6 x 18.9 x 15.0 in / 36.38 lb |
型號 / Reference
| RMVE-9QE | 100 V |
| RMVE-1QE | 120 V |
| RMVE-2QE | 230 V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE Hot Air Station | 1 |
| DDE 2 Tools Control Unit | 1 |
| MVE-A Pneumatic Desoldering Module for DDE & DME | 1 |
| T245-A General Purpose Handle (cartridge not included) | 1 |
| DR560-A Desoldering Iron | 1 |
| JT Heater Hose Sets | 1 |
| CL8499 Manual Tip Cleaner | 1 |
| Extractor Desk, composition: - 1 E2052 Extractor 20 x 20 mm - 1 E2184 Extractor 24 x 24 mm - 1 E2064 Extractor 20 x 26 mm - 1 P2220 Protector 10 x 10 mm - 1 P2235 Protector 12 x 17 mm - 1 P4000 Protector 12.4 x 12.5 mm - 1 P2230 Protector 15 x 15 mm - 1 P4010 Protector 17 x 17 mm - 1 T2050 Tripod ø39 mm - 1 T2250 Tripod ø85 mm | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| SCH-A Cartridge Holder | 1 |
| AD-SE Stand for T210 & T245 Handles | 1 |
| DR-SE Stand for DR560 | 1 |
| JT-SE Stand for JT heater | 1 |
| T260-A Pick & Place | 1 |
| PH218 Thermocouple Type K | 1 |
| PH217 Kapton tape | 1 |
產品規格 / Specifications
| Temperature (DDE) | 90 to 450 ºC / 190 to 840 ºF |
| Temperature (JTSE) | 150 to 450 ºC / 300-840 ºF |
| Air Flow (JTSE) | 5 to 50 SLPM |
| Operation modes (JTSE) | Heating / Profiles / Cooling |
| Vacuum at 6 bar (MVE) | 90% / 680 mmHg / 26.8 inHg |
| Flow rate (MVE) | 15 SLPM |
| Air pressure supply (MVE) | up to 6 bar |
| Vacuum (JTSE) | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY USB-B (rear) | Software PC / Traceability |
| USB-A (front) | Firmware update. Soldering Graphics / Profiles management. |
| Robot | RS-232 remote control or Smart Fume Extractor connection |
| Type K thermocouple (JTSE) | Can be used both for Control and Protection purposes. |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| ESD/EOS ESD safe Tip to ground resistance | <2 ohms |
| Tip to ground voltage | <2 mV RMS |
| POWER SUPPLY Peak Power (DDE) | 150 W per tool – 23.5 V |
| Peak Power (JTSE) | 700W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT Dimensions/Net weight | See individual modules |
| Package | 370 x 480 x 380 mm / 16.50 kg 14.6 x 18.9 x 15.0 in / 36.38 lb |
RMSE 規格資料
型號 / Reference
| RMSE-9QE | 100 V |
| RMSE-1QE | 120 V |
| RMSE-2QE | 230 V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE Hot Air Station | 1 |
| DDE 2 Tools Control Unit | 1 |
| MSE-A Electric Desoldering Module for DDE & DME | 1 |
| T245-A General Purpose Handle (cartridge not included) | 1 |
| DR560-A Desoldering Iron | 1 |
| JT Heater Hose Sets | 1 |
| CL8499 Manual Tip Cleaner | 1 |
| Extractor Desk, composition: - 1 E2052 Extractor 20 x 20 mm - 1 E2184 Extractor 24 x 24 mm - 1 E2064 Extractor 20 x 26 mm - 1 P2220 Protector 10 x 10 mm - 1 P2235 Protector 12 x 17 mm - 1 P4000 Protector 12.4 x 12.5 mm - 1 P2230 Protector 15 x 15 mm - 1 P4010 Protector 17 x 17 mm - 1 T2050 Tripod ø39 mm - 1 T2250 Tripod ø85 mm | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| SCH-A Cartridge Holder | 1 |
| AD-SE Stand for T210 & T245 Handles | 1 |
| DR-SE Stand for DR560 | 1 |
| JT-SE Stand for JT heater | 1 |
| T260-A Pick & Place | 1 |
| PH218 Thermocouple Type K | 1 |
| PH217 Kapton tape | 1 |
產品規格 / Specifications
| Temperature (DDE) | 90 to 450 ºC / 190 to 840 ºF |
| Temperature (JTSE) | 150 to 450 ºC / 300-840 ºF |
| Air Flow (JTSE) | 5 to 50 SLPM |
| Operation modes (JTSE) | Heating / Profiles / Cooling |
| Vacuum (MSE) | 75% / 570 mmHg / 22.4 inHg |
| Flow rate (MSE) | 9 SLPM |
| Vacuum (JTSE) | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY USB-B (rear) | Software PC / Traceability |
| USB-A (front) | Firmware update. Soldering Graphics / Profiles management. |
| Robot | RS-232 remote control or Smart Fume Extractor connection |
| Type K thermocouple (JTSE) | Can be used both for Control and Protection purposes. |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| ESD/EOS ESD safe Tip to ground resistance | <2 ohms |
| Tip to ground voltage | <2 mV RMS |
| POWER SUPPLY Peak Power (DDE) | 150 W per tool – 23.5 V |
| Peak Power (JTSE) | 700W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT Dimensions/Net weight | See individual modules |
| Package | 370 x 480 x 380 mm / 16.50 kg 14.6 x 18.9 x 15.0 in / 36.38 lb |
RMVE 規格資料
型號 / Reference
| RMVE-9QE | 100 V |
| RMVE-1QE | 120 V |
| RMVE-2QE | 230 V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE Hot Air Station | 1 |
| DDE 2 Tools Control Unit | 1 |
| MVE-A Pneumatic Desoldering Module for DDE & DME | 1 |
| T245-A General Purpose Handle (cartridge not included) | 1 |
| DR560-A Desoldering Iron | 1 |
| JT Heater Hose Sets | 1 |
| CL8499 Manual Tip Cleaner | 1 |
| Extractor Desk, composition: - 1 E2052 Extractor 20 x 20 mm - 1 E2184 Extractor 24 x 24 mm - 1 E2064 Extractor 20 x 26 mm - 1 P2220 Protector 10 x 10 mm - 1 P2235 Protector 12 x 17 mm - 1 P4000 Protector 12.4 x 12.5 mm - 1 P2230 Protector 15 x 15 mm - 1 P4010 Protector 17 x 17 mm - 1 T2050 Tripod ø39 mm - 1 T2250 Tripod ø85 mm | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| SCH-A Cartridge Holder | 1 |
| AD-SE Stand for T210 & T245 Handles | 1 |
| DR-SE Stand for DR560 | 1 |
| JT-SE Stand for JT heater | 1 |
| T260-A Pick & Place | 1 |
| PH218 Thermocouple Type K | 1 |
| PH217 Kapton tape | 1 |
產品規格 / Specifications
| Temperature (DDE) | 90 to 450 ºC / 190 to 840 ºF |
| Temperature (JTSE) | 150 to 450 ºC / 300-840 ºF |
| Air Flow (JTSE) | 5 to 50 SLPM |
| Operation modes (JTSE) | Heating / Profiles / Cooling |
| Vacuum at 6 bar (MVE) | 90% / 680 mmHg / 26.8 inHg |
| Flow rate (MVE) | 15 SLPM |
| Air pressure supply (MVE) | up to 6 bar |
| Vacuum (JTSE) | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY USB-B (rear) | Software PC / Traceability |
| USB-A (front) | Firmware update. Soldering Graphics / Profiles management. |
| Robot | RS-232 remote control or Smart Fume Extractor connection |
| Type K thermocouple (JTSE) | Can be used both for Control and Protection purposes. |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| ESD/EOS ESD safe Tip to ground resistance | <2 ohms |
| Tip to ground voltage | <2 mV RMS |
| POWER SUPPLY Peak Power (DDE) | 150 W per tool – 23.5 V |
| Peak Power (JTSE) | 700W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT Dimensions/Net weight | See individual modules |
| Package | 370 x 480 x 380 mm / 16.50 kg 14.6 x 18.9 x 15.0 in / 36.38 lb |
