JTSE高效熱風工作站的解焊工序
步驟一：佈局 (Placing)
選擇最適合組件的抽取器或保護器和三腳架。
步驟二：加熱 (Heating)
在向元件施加熱量時，周圍的元件能夠受到保護
步驟三：抽取 (Extracting)
最後自動撤回已拆焊的組件
JTSE 規格資料
JTSE-A 規格資料
型號 / Reference
| JTSE-1A | 100-120V |
| JTSE-2A | 230V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE-UA Hot Air Control Unit | 1 |
| JT Heater Hose Sets | 1 |
| Extractor Desk, composition: 1 E2052 Extractor 20 x 20 mm 1 E2064 Extractor 20 x 26 mm 1 E2184 Extractor 24 x 24 mm 1 P2220 Protector 10 x 10 mm 1 P2235 Protector 12 x 17 mm 1 P4000 Protector 12.4 x 12.5 mm 1 P2230 Protector 15 x 15 mm 1 P4010 Protector 17 x 17 mm 1 T2050 Tripod ø39 mm 1 T2250 Tripod ø85 mm | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| JT-SE Stand for JT heater | 1 |
| PH218 Thermocouple Type K | 1 |
型號 / Reference
| JTSE-1QA | 100-120 V |
| JTSE-2QA | 230 V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE-UA Hot Air Control Unit | 1 |
| JT Heater Hose Sets | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| JT-SE Stand for JT heater | 1 |
| PH218 Thermocouple Type K | 1 |
產品規格 / Specifications
| Selectable Temperature | 150 to 450 ºC (300-840 ºF) |
| Air flow | 5 to 50 SLPM |
| Temperature profiles: | Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored. |
| Operating modes | Heating / Profiles / Cooling |
| Vacuum | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY Type K thermocouple: | Can be used both for Control and Protection purposes. |
| USB-B (rear) | Software PC |
| USB-A (front) | Firmware update, Graphics / Profiles management |
| Robot | RS-232 remote control |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| POWER SUPPLY Peak power | 700 W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| Ambient operating temp. | 230 x 148 x 160 mm / 4.93 kg. 9.06 x 5.83 x 6.30 in / 10.86 lb. |
| Package | 474 x 368 x 195 mm / 6.01 kg. 18.66 x 14.49 x 7.68 in / 13.25 lb. |
產品規格 / Specifications
| Selectable Temperature | 150 to 450 ºC (300-840 ºF) |
| Air flow | 5 to 50 SLPM |
| Temperature profiles: | Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored. |
| Operating modes | Heating / Profiles / Cooling |
| Vacuum | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY Type K thermocouple: | Can be used both for Control and Protection purposes. |
| USB-B (rear) | Software PC |
| USB-A (front) | Firmware update, Graphics / Profiles management |
| Robot | RS-232 remote control |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| POWER SUPPLY Peak power | 700 W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| Ambient operating temp. | 230 x 148 x 160 mm / 4.93 kg. 9.06 x 5.83 x 6.30 in / 10.86 lb. |
| Package | 474 x 368 x 195 mm / 6.01 kg. 18.66 x 14.49 x 7.68 in / 13.25 lb. |
JTSE 規格資料
型號 / Reference
| JTSE-1A | 100-120V |
| JTSE-2A | 230V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE-UA Hot Air Control Unit | 1 |
| JT Heater Hose Sets | 1 |
| Extractor Desk, composition: 1 E2052 Extractor 20 x 20 mm 1 E2064 Extractor 20 x 26 mm 1 E2184 Extractor 24 x 24 mm 1 P2220 Protector 10 x 10 mm 1 P2235 Protector 12 x 17 mm 1 P4000 Protector 12.4 x 12.5 mm 1 P2230 Protector 15 x 15 mm 1 P4010 Protector 17 x 17 mm 1 T2050 Tripod ø39 mm 1 T2250 Tripod ø85 mm | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| JT-SE Stand for JT heater | 1 |
| PH218 Thermocouple Type K | 1 |
產品規格 / Specifications
| Selectable Temperature | 150 to 450 ºC (300-840 ºF) |
| Air flow | 5 to 50 SLPM |
| Temperature profiles: | Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored. |
| Operating modes | Heating / Profiles / Cooling |
| Vacuum | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY Type K thermocouple: | Can be used both for Control and Protection purposes. |
| USB-B (rear) | Software PC |
| USB-A (front) | Firmware update, Graphics / Profiles management |
| Robot | RS-232 remote control |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| POWER SUPPLY Peak power | 700 W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| Ambient operating temp. | 230 x 148 x 160 mm / 4.93 kg. 9.06 x 5.83 x 6.30 in / 10.86 lb. |
| Package | 474 x 368 x 195 mm / 6.01 kg. 18.66 x 14.49 x 7.68 in / 13.25 lb. |
JTSE-A 規格資料
型號 / Reference
| JTSE-1QA | 100-120 V |
| JTSE-2QA | 230 V |
標準配件 / Product Composition
| 配件 | 數量 |
|---|---|
| JTSE-UA Hot Air Control Unit | 1 |
| JT Heater Hose Sets | 1 |
| JN2015 Nozzle for JT heater | 1 |
| JN2012 Nozzle for JT heater | 1 |
| JN2020 Nozzle for JT heater | 1 |
| JT-SE Stand for JT heater | 1 |
| PH218 Thermocouple Type K | 1 |
產品規格 / Specifications
| Selectable Temperature | 150 to 450 ºC (300-840 ºF) |
| Air flow | 5 to 50 SLPM |
| Temperature profiles: | Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored. |
| Operating modes | Heating / Profiles / Cooling |
| Vacuum | 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY Type K thermocouple: | Can be used both for Control and Protection purposes. |
| USB-B (rear) | Software PC |
| USB-A (front) | Firmware update, Graphics / Profiles management |
| Robot | RS-232 remote control |
| Pedal | Optional tool control |
| Equipotential bonding | Optional connection to EPA |
| POWER SUPPLY Peak power | 700 W |
| Ambient operating temp. | 10 to 50 ºC / 50 to 120 ºF |
| Ambient operating temp. | 230 x 148 x 160 mm / 4.93 kg. 9.06 x 5.83 x 6.30 in / 10.86 lb. |
| Package | 474 x 368 x 195 mm / 6.01 kg. 18.66 x 14.49 x 7.68 in / 13.25 lb. |
JTSE/ JTSE-A 規格資料
搭配烙鐵頭 / Cartridge Range
N/A
